Wednesday, February 8, 2012

HWS Part 11


The Fin Outline shape is done. Still needs the leading and trailing edge to be foiled but it has been sanded smooth with 80 grit sandpaper and is ready to be laminated to the board (if I put it on the board) still haven't decided.


The next few pics are of the board after laminating with 4 oz cloth. Before I laminated I did a sealer coat with thinned out laminating resin. No Styrene just acetone to thin it out. Wanted to make sure I got good adhesion to the wood. The lam came out nice and tight. Hot coat next!













No comments:

Post a Comment